Icharger X6 vs. S6: Which is Better?

The main difference between the two chargers is their maximum charging power. The S6 has a higher power of 1100W, which means it can handle higher charging currents and voltages. This leads us to the question:

Should you choose S6 or X6?

The answer depends on your specific needs.

If you are an FPV quadcopter enthusiast, the charging power provided by the X6 should be sufficient for your needs. The batteries used in FPV quadcopters, especially those for 1-inch to 5-inch FPV quadcopters, are generally not large. It’s important to note that we usually don’t need such high charging power, as generally charging at 1C to 5C is enough to avoid damaging the battery.

If you are an RC airplane, drone, or RC car enthusiast, you may use larger batteries, such as lipo batteries of 5000mah or above. In that case, the S6 would be the better choice.

In addition, you should also consider your budget. If your budget allows, spending an extra 20 dollars for the S6 is a viable option. After all, chargers are not consumables and can last for a long time. In conclusion, make a wise choice based on your needs and budget.

Here’s a table I’ve put together about the comparison between their functional parameters:

Detailed base comparison: Icharger s6 vs x6

Specification	X6	S6
Max Charge Power	800W	1100W
Charge/Discharge Current	0.05-30A	0.1-40A
Input Voltage	7-32V DC	9-32V DC
Input Current Limit	35A	45A
Internal Discharge Power(Max)	30W	40W
Regenerative Discharge Power(Max)	800W	1100W
External Discharge Power(Max)	900W	1200W
Balance Current	2A	2A
Dimensions	83x65x37mm	83x71x37mm
Weight	168g	200g

Maximum Charge Power

The S6 has a maximum charging power of 1100W, while the X6 has 800W. This means that the S6 can handle higher charging currents and voltages, making it a better option for users with larger batteries.

Charge/Discharge Current

The S6 supports a charge/discharge current range from 0.1A to 40A, while the X6 supports a range from 0.05A to 30A. This gives the S6 a significant advantage in terms of versatility and speed, as it can handle larger currents.

Input Voltage

Both chargers support a wide range of input voltages, with the S6 supporting 9-32V DC and the X6 supporting 7-32V DC. This makes both chargers versatile and suitable for various power sources.

Balance Current

Both the S6 and X6 have a balanced current of 2A. This means that they can efficiently balance the voltage of each cell in a battery pack, ensuring that the pack is evenly charged and discharged.

Dimensions and Weight

The S6 and X6 have similar dimensions, with the S6 being slightly larger at 83x71x37mm and the X6 at 83x65x37mm. The S6 is also slightly heavier at 200g compared to the X6 at 168g. However, these differences are minimal and unlikely to be a significant factor in the decision-making process.

In conclusion, the S6 is the better option for users with larger batteries and higher power needs, while the X6 is sufficient for those with smaller batteries. The S6 has a clear advantage in terms of maximum charging power, charge/discharge current range, and versatility, making it the better choice for those who can afford the slightly higher cost.